Home Products Industrial Liquid Filter Cartridges DPSTF Sterilizing-Grade Liquid Filter

DPSTF Sterilizing-Grade Liquid Filter

Sterilizing grade filter using a unique asymmetric technology coupled with a pre-filter layer. Good application with many special fluids.

Recommended Applications：

Request a Quote

Description Specifications Ordering Information

Description

Features

Hydrophilic PES membrane has a wide range of chemical compatibility
Unique asymmetrical structure with excellent flow rate
Built-in pre-filtration layer, long service life, low cost

Applications

Highly viscous fluid
Sterile filtration

Quality

100% Integrity testing in manufacturing
Each filter is fully traceable with unique serial number
Manufactured in a facility which adheres to ISO 9001:2015 Practices

Flow Rate Characteristics

Specifications

Material of Construction

Membrane	Hydrophilic polyethersulfone (PES)
Support	Polypropylene (PP)
Core/Cage/End Caps	Polypropylene (PP)
End Cap Inserts	Polybutylene terephthalate (PBT)
Seal Material	Silicone / EPDM / Viton FEP/ PFA encapsulated O-rings

Operating Conditions

Max. Operating Temperature	80°C
Max.Operating Pressure	0.69 MPa@25°C 0.40 MPa@60°C 0.24 MPa@80°C
Max. Differential Pressure (Forward)	0.69 MPa@25°C 0.40 MPa@60°C 0.24 MPa@80°C
Max. Differential Pressure (Reverse)	0.30 MPa@25°C 0.10 MPa@80°C

Filtration Area

Outer Diameter	Membrane Pore Size	Area/10"
69mm	0.22μm	0.58m2

Integrity Test Standards @10inch，20°C

Membrane Pore Size	Bubble Point
0.22μm	≥ 0.30 MPa (water), Air test

Bacterial Retention

Model	Content
DPSTF 0.22μm	Bacterial quantitative retention of 10? cfu/cm2 Brevundimonas diminuta (ATCC 19146) accordingto ASTM F838 methodology.

Sterilization

In-line steam sterilization	Up to 60 cycles (135 °C for 30 min and differential pressure < 30 kPa per cycle)
Autoclave	Up to 200 cycles (130 °C for 30 min per cycle)

Regulatory Compliance

Autoclaved filter effluent meets the USP<788> requirement of particulate matter in large volume injection.
Component materials meet the criteria for a "Non-fiber-releasing filter" as defined in 21 CFR 210.3(b)(6).
Aqueous extraction from a cartridge contains less than 0.25EU/ml as determined by Limulus Amebocyte Lysate (LAL), meeting requirements of USP<85>.
Meet the requirement of USP <87> In Vitro Cytotoxicity Test.
Component materials meet the requirements of the current USP<88> for plastic class VI-121°C.
All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Based on the current information from our suppliers, all component materials used in the manufacture of this product are animal-free.

End Cap

Ordering Information

Outer Diameter	Type	Membrane Pore Size	End Cap	Nominal Length	Seal Material	Industry
69mm	DPSTF	0022 0.22μm	DOE Double Open End	05 5 inch	S Silicone	P
			HTF 222/Fin	10 10 inch	E EPDM
			HSF 226/Fin	20 20 inch	V Viton
			HTCG 222/Flat	30 30 inch	P FEP/PFA encapsulated O-rings
			HSCG 226/Flat	40 40 inch

* Example：DPSTF0022DOE05SP (DPSHSL，0.22+0.1μm，Doulbe open end，5 inch，Silicone，Pharmaceutical)

靠逼视频,欧美亚洲日韩女优中文另类,亚洲av成熟,第六色无码精品