eShop
Sign in
English
HSGPFP Sterilizing-Grade Gas Filter
Cobetter HSGPFP series filter cartridge is made of PTFE membrane. Its support is made of polyphenylene sulphide and can resist higher temperature. It is widely used in gas sterile filtration in pharmaceutical, biological products, fermentation industry. The intrinsic hydrophobicity as well as 100% integrity testing ensure absolute sterilization.
Recommended Applications：
Request a Quote
Description
Features
- Filter membranes are intrinsically hydrophobic, ensuring absolute sterilization under dry or wet conditions
- Antioxidant components and support layer for longer service life time
- Polyphenylene sulphide support for high temperature resistance
- Option of repeated steaming sterilze in-line and autoclave
- 100% integrity test of the cartridge before delivery and can be tested during use to ensure the integrity of the cartridge and the effect of sterilization
Applications
- Aseptic air inlet and exhaust filtration for fermentation tanks, storage tanks, batching tanks, etc.
- Sterile filtration of aseptic packaging gases
- Sterile filtration of compressed air and nitrogen
- Sterile filtration of corrosive gases
Quality
- 100% Integrity testing in manufacturing
- Each filter is fully traceable with unique serial number
- Manufactured in a facility which adheres to ISO 9001:2015 Practices
Flow Rate (Air)
Specifications
Materials of Construction
| Membrane | Hydrophobic polytetrafluoroethylene (PTFE) |
| Support | Polyphenylene sulfide (PPS) |
| Core/Cage/End Caps | Polypropylene (PP) |
| End Cap Inserts | 316L Stainless Steel, Polybutylene terephthalate (PBT) |
| Seal Material | Silicone / EPDM / Viton FEP/ PFA encapsulated O-rings |
Operating Conditions
| Max. Operating Temperature |
80°C |
| Max.Operating Pressure |
0.69 MPa@25°C 0.40 MPa@60°C 0.34 MPa@80°C |
| Max. Differential Pressure (Forward) |
0.69 MPa@25°C 0.40 MPa@60°C 0.34 MPa@80°C |
| Max. Differential Pressure (Reverse) |
0.30 MPa@25°C 0.10 MPa@80°C |
Filtration Area
| Outer Diameter | Membrane Pore Size | Area/10" |
| 68 mm | 0.01 μm (According to gas particle retention efficiency) |
0.68 m2 |
| 68 mm | 0.22 μm (According to liquid bacterial challenge retention efficiency) |
0.68 m2 |
Integrity Test Standards @10inch，20℃
| Membrane Pore Size | Bubble Point | 空氣擴散流 | Water Flow Test |
| 0.01 μm/0.22 μm | ≥ 0.11 MPa, 60% IPA, 40% Water, Air test |
≤ 16 ml/min @ 0.08 MPa, 60% IPA, 40% Water |
≤ 0.53 ml/min @ 0.25 Mpa |
Bacterial Retention
| Model | Content |
| HSGPFP 0.22 μm | Bacterial quantitative retention of 10? cfu/cm2 Brevundimonas diminuta (ATCC 19146) accordingto ASTM F838 methodology. |
| HSGPFP 0.01 μm | Retention efficiency for > 1×10? pfu Bacteriophage Phi-X174 (ATCC 13706-B1) phage aerosol LRV>7 |
Sterilization
| In-line steam sterilization | Up to 100 cycles (145 °C for 30 min and differential pressure < 30 kPa per cycle)+ up to 50 cycles ( for reverse, differential pressure ＜10 kPa), in total up to 150 cycles |
| Autoclave | Up to 400 cycles (130 °C for 30 min per cycle) |
Regulatory Compliance
- Autoclaved filter effluent meets the USP<788> requirement of particulate matter in large volume injection.
- Component materials meet the criteria for a "Non-fiber-releasing filter" as defined in 21 CFR 210.3(b)(6).
- Aqueous extraction from a cartridge contains less than 0.25EU/ml as determined by Limulus Amebocyte Lysate (LAL), meeting requirements of USP<85>.
- Meet the requirement of USP <87> In Vitro Cytotoxicity Test.
- Component materials meet the requirements of the current USP<88> for plastic class VI-121°C.
- All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
- Based on the current information from our suppliers, all component materials used in the manufacture of this product are animal-free.
End Cap
Ordering Information
| Outer Diameter | Type | Membrane Pore Size | End Cap | Nominal Length | Seal Material | Industry |
| Blank 68mm | HSGPFP | 0001 0.01 μm | DOE Double Open End | 05 5 inch | S Silicone | P |
| 71 71mm | 0022 0.22 μm | HTF 222/Fin | 10 10 inch | E EPDM | ||
| SSF 226/Fin (SS insert) | 20 20 inch | V Viton | ||||
| HSF 226/Fin (PBT insert) | 30 30 inch | P FEP/PFA encapsulated O-rings | ||||
| SSCM 226/Flat (SS insert) | 40 40 inch | |||||
| HSCG 226/Flat (PBT insert) |
* Example：HSGPFP0001DOE05SP (HSGPFP，0.01μm，Double open end，5 inch，Silicone，Pharmaceutical)
